High resolution Scanning Electron Microscope FEI Verios 460L

CHENNAM, P.; KACHLÍK, M.;ŘÍHOVÁ, M.; ČIČMANCOVÁ, V.; MACA, K.; MACÁK, J.; , 2024: Synthesis of centrifugally spun polyacrylonitrile-carbon fibers. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 28, p. 2199 - 7, doi: 10.1016/j.jmrt.2023.12.146 (RIGAKU3, VERIOS, LEICACOAT-STAN, FTIR)

BAWAB, B.; THALLURI, S.; KOLÍBALOVÁ, E.; ZAZPE MENDIOROZ, R.; JELÍNEK, L.; RODRIGUEZ PEREIRA, J.; MACÁK, J., 2024: Synergistic effect of Pd single atoms and nanoparticles deposited on carbon supports by ALD boosts alkaline hydrogen evolution reaction. CHEMICAL ENGINEERING JOURNAL 482, p. 1 - 9, doi: 10.1016/j.cej.2024.148959 (ALD, VERIOS, TITAN, KRATOS-XPS, RIGAKU3)

RONOH, K.; NOVOTNÝ, J.; MRŇA, L.; KNÁPEK, A.; SOBOLA, D., 2024: Effects of laser and scanning parameters on surface modification of MONEL ® alloy 400 by picosecond laser . OPTICS AND LASER TECHNOLOGY 172, p. 1 - 19, doi: 10.1016/j.optlastec.2023.110514 (VERIOS, DEKTAK)

NOUSEEN, S.; GHOSH, K.; PUMERA, M., 2024: 3D printing of MAX/PLA filament: Electrochemical in-situ etching for enhanced energy conversion and storage. ELECTROCHEMISTRY COMMUNICATIONS 160, doi: 10.1016/j.elecom.2023.107652 (VERIOS, LYRA, KRATOS-XPS, RIGAKU3)

DALLAEV, R.; SPUSTA, T.; ALLAHAM, M.; SPOTZ, Z.; SOBOLA, D., 2024: Synthesis and Band Gap Characterization of High-Entropy Ceramic Powders. CRYSTALS 14 (4), p. 1 - 10, doi: 10.3390/cryst14040295 (RIGAKU3, VERIOS, KRATOS-XPS, JASCO)

MAŘÁK, V.; HENRIQUES, M.; MARINKOVIC, B.; DRDLÍK, D., 2024: Rapid densification of low-positive thermal expansion Al2W3O12 ceramics. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, p. 6548 - 8, doi: 10.1016/j.jeurceramsoc.2024.04.036 (VERIOS, RIGAKU3)

MAPPOLI, S.; GHOSH, K.; PUMERA, M., 2024: Integrated free-standing WS₂ 3D-printed carbon supercapacitor with solid state electrolyte. VIRTUAL AND PHYSICAL PROTOTYPING 19 (1), doi: 10.1080/17452759.2024.2326897 (VERIOS, KRATOS-XPS)

NATARAJAN, S.; ORAL, Ç.; NOVOBILSKÝ, A.; PUMERA, M., 2024: Intelligent Magnetic Microrobots with Fluorescent Internal Memory for Monitoring Intragastric Acidity. ADVANCED FUNCTIONAL MATERIALS 34 (29), p. 1 - 12, doi: 10.1002/adfm.202401463 (FTIR-CHEMLAB, VERIOS, MIRA-STAN, LEICACOAT-STAN, RIGAKU3)

Krčma, J., 2024: Controlled Excitation of Magnons through Optically Induced Mie Resonances in Periodic Dielectric Nanostructures. BACHELOR'S THESIS (EVAPORATOR, RAITH, RIE-FLUORINE, KAUFMAN, BRILLOUIN, VERIOS)

Karpinski, D.; Polcar, T.; Bondarev, A., 2024: Exploring nanoscale metallic multilayer Ta/Cu films: Structure and some insights on deformation and strengthening mechanisms. MATERIALS CHARACTERIZATION 212, doi: 10.1016/j.matchar.2024.113933 (TITAN, VERIOS, HELIOS)

SUBHADARSHINI, S.; GHOSH, K.; PUMERA, M., 2024: Multiscale hierarchical nanoarchitectonics with stereographically 3D-printed electrodes for water splitting and energy storage. MATERIALS TODAY 74, p. 34 - 12, doi: 10.1016/j.mattod.2024.02.004 (MONOWAVE, KRATOS-XPS, VERIOS, JASCO)

BIJALWAN, V.; KAŠTYL, J.; ERHART, J.; PRAJZLER, V.; TOFEL, P.; SOBOLA, D.; VELAZQUEZ, J.; GALUSEK, D.; MACA, K., 2024: Optical and electrical performance of translucent BaTiO3-BaSnO3 ceramics. CERAMICS INTERNATIONAL 50 (16), p. 28123 - 10, doi: 10.1016/j.ceramint.2024.05.111 (RIGAKU3, VERIOS, WOOLLAM-VIS)

CIHLÁŘ, J.; TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; ČÁSTKOVÁ, K.; TRUNEC, M.; ČELKO, L., 2024: Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane. GELS 10 (5), doi: 10.3390/gels10050328 (VERIOS, KRATOS-XPS)

NOUSEEN, S.; DESHMUKH, S.; PUMERA, M., 2024: Nanoarchitectonics of Laser Induced MAX 3D-Printed Electrode for Photo-Electrocatalysis and Energy Storage Application with Long Cyclic Durability of 100 000 Cycles. ADVANCED FUNCTIONAL MATERIALS 34 (45), p. 1 - 12, doi: 10.1002/adfm.202407071 (VERIOS, LYRA, RIGAKU3, KRATOS-XPS, JASCO)

GAO, W.; MICHALIČKA, J.; PUMERA, M., 2024: Atomic tuning of 3D printed carbon surface chemistry for electrocatalytic nitrite oxidation and reduction to ammonia. JOURNAL OF MATERIALS CHEMISTRY A 12 (46), p. 32458 - 13, doi: 10.1039/d4ta06800a (KRATOS-XPS, RIGAKU3, VERIOS, TITAN)

KALLESHAPPA, B.; PUMERA, M., 2024: Recyclable HF-free Ti₃C₂T_<i>x</i> 3D-printed supercapacitors: their second life in sodium-ion batteries. JOURNAL OF MATERIALS CHEMISTRY A 13 (1), p. 795 - 13, doi: 10.1039/d4ta07436j (VERIOS, KRATOS-XPS)

BIJALWAN, V.; KAŠTYL, J.; PRAJZLER, V.; ERHART, J.; POUCHLÝ, V.; MACA, K., 2023: (Ba,Ca)(Ti,Zr)O3-CeO2 translucent and opaque ceramics - Optical and electromechanical characteristics. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 43 (2), p. 341 - 9, doi: 10.1016/j.jeurceramsoc.2022.10.022 (VERIOS, WOOLLAM-VIS)

CIHLÁŘ, J.; TINOCO NAVARRO, L.; CIHLÁŘ, J.; KAŠPÁREK, V.; MICHALIČKA, J.; ČÁSTKOVÁ, K.; LÁZÁR, I.; KAŠTYL, J.; ČELKO, L.; VESELÝ, M.; DZIK, P., 2023: Influence of substituted acetic acids on “bridge” synthesis of highly photocatalytic active heterophase TiO2 in hydrogen production . JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY 105 (2), p. 471 - 18, doi: 10.1007/s10971-022-06011-8 (RIGAKU3, VERIOS, TITAN, KRATOS-XPS)

RONOH, K.; SOBOLA, D.; MRŇA, L.; NOVOTNÝ, J.; DALLAEV, R.; KNÁPEK, A.; KOLAŘÍK, V.; HOLCMAN, V., 2023: Characterization of the picosecond laser-ablated HOPG using Raman spectroscopy and SEM microscopy. MATERIALS TODAY COMMUNICATIONS 34, doi: 10.1016/j.mtcomm.2022.105181 (VERIOS)

MOTYČKOVÁ, L.; ARREGI URIBEETXEBARRIA, J.; STAŇO, M.; PRŮŠA, S.; ČÁSTKOVÁ, K.; UHLÍŘ, V., 2023: Preserving Metamagnetism in Self-Assembled FeRh Nanomagnets. ACS APPLIED MATERIALS & INTERFACES 15 (6), p. 8653 - 13, doi: 10.1021/acsami.2c20107 (MAGNETRON, VERSALAB, RIGAKU9, ICON-SPM, VERIOS)

Jancik-Prochazkova, A.; Michalkova, H.; Heger, Z.; Pumera, M., 2023: Hydrogen Bonding Nanoarchitectonics of Organic Pigment-Based Janus Microrobots with Entering Capability into Cancer Cells. ACS NANO 17 (1), p. 146 - 156, doi: 10.1021/acsnano.2c05585 (VERIOS, MIRA-STAN, LEICACOAT-STAN, FTIR)

ORAL, Ç.; USSIA, M.; URSO, M.; SALÁT, J.; NOVOBILSKÝ, A.; ŠTEFÁNIK, M.; RŮŽEK, D.; PUMERA, M., 2023: Radiopaque Nanorobots as Magnetically Navigable Contrast Agents for Localized In Vivo Imaging of the Gastrointestinal Tract. ADVANCED HEALTHCARE MATERIALS 12 (8), doi: 10.1002/adhm.202202682 (VERIOS, MIRA-STAN, RIGAKU3, VERSALAB)

HORÁK, M.; ČALKOVSKÝ, V.; MACH, J.; KŘÁPEK, V.; ŠIKOLA, T., 2023: Plasmonic Properties of Individual Gallium Nanoparticles. J PHYS CHEM LETT 14 (8), p. 2012 - 8, doi: 10.1021/acs.jpclett.3c00094 (VERIOS, TITAN)

KAMNEV, K.; PYTLÍČEK, Z.; BENDOVÁ, M.; PRÁŠEK, J.; GISPERT-GUIRADO, F.; LLOBET, E.; MOZALEV, A., 2023: The planar anodic Al2O3-ZrO2 nanocomposite capacitor dielectrics for advanced passive device integration. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 24 (1), p. 1 - 17, doi: 10.1080/14686996.2022.2162324 (MAGNETRON, SUSS-MA8, SUSS-RCD8, VERIOS, KRATOS-XPS, MPS150)

GHOSH, K.; IFFELSBERGER, C.; KONEČNÝ, M.; VYSKOČIL, J.; MICHALIČKA, J.; PUMERA, M., 2023: Nanoarchitectonics of Triboelectric Nanogenerator for Conversion of Abundant Mechanical Energy to Green Hydrogen. ADVANCED ENERGY MATERIALS 13 (11), doi: 10.1002/aenm.202203476 (VERIOS, MIRA-STAN, TITAN, RIGAKU3, ICON-SPM, MPS150, KEITHLEY-4200)

TINOCO NAVARRO, L.; BEDNAŘÍKOVÁ, V.; KAŠTYL, J.; CIHLÁŘ, J., 2023: Structure and Photocatalytic Properties of Ni-, Co-, Cu-, and Fe-Doped TiO₂ Aerogels. GELS 9 (5), p. 1 - 21, doi: 10.3390/gels9050357 (RIGAKU3, VERIOS, BET-ANAMET, JASCO, MIRA-STAN, TITAN)

LIŠKA, P.; MUSÁLEK, T.; ŠAMOŘIL, T.; KRATOCHVÍL, M.; MATULA, R.; HORÁK, M.; NEDVĚD, M.; URBAN, J.; PLANER, J.; ROVENSKÁ, K.; DVOŘÁK, P.; KOLÍBAL, M.; KŘÁPEK, V.; KALOUSEK, R.; ŠIKOLA, T., 2023: Correlative Imaging of Individual CsPbBr3 Nanocrystals: Role of Isolated Grains in Photoluminescence of Perovskite Polycrystalline Thin Films. JOURNAL OF PHYSICAL CHEMISTRY C (PRINT) 127 (25), p. 12404 - 10, doi: 10.1021/acs.jpcc.3c03056 (LYRA, VERIOS, ICON-SPM, KRATOS-XPS, TITAN)

ALIJANI, M.; WILTSHIRE, B.; SOPHA, H.; SARPANAH, Z.; MISTRÍK, J.; HROMÁDKO, L.; ZARIFI, M.; MACÁK, J., 2023: Investigating the thickness-effect of free-standing high aspect-ratio TiO2 nanotube layers on microwave-photoresponse using planar microwave resonators. APPLIED MATERIALS TODAY 32, p. 1 - 10, doi: 10.1016/j.apmt.2023.101832 (VERIOS)

ZANGANA, S.; LEDNICKÝ, T.; BONYÁR, A., 2023: Three Generations of Surface Nanocomposites Based on Hexagonally Ordered Gold Nanoparticle Layers and Their Application for Surface-Enhanced Raman Spectroscopy. CHEMOSENSORS 11 (4), p. 1 - 14, doi: 10.3390/chemosensors11040235 (VERIOS, HELIOS, RIE-FLUORINE, DIENER)

ŠŤASTNÝ, P.; CHLUP, Z.; HLINIČAN, J.; KAŠTYL, J.; TRUNEC, M., 2023: Effect of cyclic loading on the microstructure of thin zirconia tapes. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 43 (10), p. 4498 - 8, doi: 10.1016/j.jeurceramsoc.2023.03.024 (VERIOS, HELIOS, LEICACOAT-STAN, RIGAKU3)

Nedvěd, M., 2023: In-situ microscopy in corrosive environment. MASTER'S THESIS, p. 1 - 87 (KRATOS-XPS, VERIOS)

ULLATTIL, S.; PUMERA, M., 2023: Light-Powered Self-Adaptive Mesostructured Microrobots for Simultaneous Microplastics Trapping and Fragmentation via in situ Surface Morphing. SMALL, doi: 10.1002/smll.202301467 (VERIOS, RIGAKU3, KRATOS-XPS, BET-ANAMET)

RONOH, K.; HEKMAT, S.; HOLCMAN, V.; KNÁPEK, A.; SOBOLA, D., 2023: Comprehensive characterization of different metallic thin films on highly oriented pyrolytic graphite substrate. VACUUM 215, p. 1 - 16, doi: 10.1016/j.vacuum.2023.112345 (EVAPORATOR, KRATOS-XPS, VERIOS, ICON-SPM)

SIDDIQUI, M.; VALÁŠEK, D.; BAI, Y.; SALAMON, D., 2023: Phase transformation of cold-sintered doped barium titanate ceramics during the post-annealing process. OPEN CERAMICS 15, doi: 10.1016/j.oceram.2023.100401 (VERIOS, RIGAKU3)

DEÁK, A.; SZABÓ, P.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; DEMETER, A.; REMEŠOVÁ, M.; COLACINO, E.; ČELKO, L., 2023: The first solid-state route to luminescent Au(I)-glutathionate and its pH-controlled transformation into ultrasmall oligomeric Au10-12(SG)10-12 nanoclusters for application in cancer radiotheraphy. FRONTIERS IN CHEMISTRY 11, doi: 10.3389/fchem.2023.1178225 (RIGAKU3, KRATOS-XPS, MIRA-STAN, VERIOS, LEICACOAT-STAN)

GOMEZ PEREZ, I.; DIAZ-SANCHEZ, M.; PIZÚROVÁ, N.; ZAJÍČKOVÁ, L.; PRASHAR, S.; GOMEZ-RUIZ, S., 2023: Crystalline F-doped titanium dioxide nanoparticles decorated with graphene quantum dots for improving the photodegradation of water pollutants. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A:CHEMISTRY 443, doi: 10.1016/j.jphotochem.2023.114875 (KRATOS-XPS, VERIOS, ICON-SPM)

GAO, W.; PERALES RONDON, J.; MICHALIČKA, J.; PUMERA, M., 2023: Ultrathin manganese oxides enhance the electrocatalytic properties of 3D printed carbon catalysts for electrochemical nitrate reduction to ammonia. APPLIED CATALYSIS B: ENVIRONMENTAL 330, doi: 10.1016/j.apcatb.2023.122632 (ALD, VERIOS, LYRA, TITAN, KRATOS-XPS, JASCO)

PAREDES SÁNCHEZ, C.; ROLEČEK, J.; PEJCHALOVÁ, L.; SPUSTA, T.; SALAMON, D.; MIRANDA, P., 2023: Evaluating the suitability of fast sintering techniques for the consolidation of calcium phosphate scaffolds produced by DLP. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 43 (14), p. 6493 - 11, doi: 10.1016/j.jeurceramsoc.2023.05.052 (VERIOS, LYRA, RIGAKU3)

Sharifahmadian, O.; Pakseresht, A.; Mirzaei, S.; Eliáš, M.; Galusek, D., 2023: Mechanically robust hydrophobic fluorine-doped diamond-like carbon film on glass substrate. DIAMOND AND RELATED MATERIALS 138, doi: 10.1016/j.diamond.2023.110252 (KRATOS-XPS, VERIOS, NANOINDENTER, RIE-FLUORINE)

Alijani, M., 2023: Electrochemical synthesis, characterization and applications of new types of 1D valve metal oxide nanostructures. PH.D. THESIS, p. 1 - 32 (VERIOS, RIGAKU3)

Maniš, J., 2023: Preparation and characterization of nanostructured III-V semiconductor materials. PH.D. THESIS, p. 1 - 137 (ICON-SPM, VERIOS, TITAN)

GOMEZ PEREZ, I.; OVEJERO-PAREDES, K.; MENDEZ-ARRIAGA, J.; PIZÚROVÁ, N.; FILICE, M.; ZAJÍČKOVÁ, L.; PRASHAR, S.; GOMEZ-RUIZ, S., 2023: Organotin(IV)-Decorated Graphene Quantum Dots as Dual Platform for Molecular Imaging and Treatment of Triple Negative Breast Cancer. CHEMISTRY - A EUROPEAN JOURNAL, doi: 10.1002/chem.202301845 (ICON-SPM, VERIOS, KRATOS-XPS)

KANDAMBATH PADINJAREVEETIL, A.; PERALES RONDON, J.; ZAORALOVÁ, D.; OTYEPKA, M.; ALDUHAISH, O.; PUMERA, M., 2023: Fe-MOF Catalytic Nanoarchitectonic toward Electrochemical Ammonia Production. ACS APPLIED MATERIALS & INTERFACES 15 (40), p. 47294 - 13, doi: 10.1021/acsami.3c12822 (LYRA, VERIOS, JASCO, KRATOS-XPS, RIGAKU3)

BAISHYA, K.; VRCHOVECKÁ, K.; ALIJANI, M.; RODRIGUEZ PEREIRA, J.; THALLURI, S.; PÁVKOVÁ GOLDBERGOVÁ, M.; PŘIBYL, J.; MACÁK, J., 2023: Bio-AFM exploits enhanced response of human gingival fibroblasts on TiO2 nanotubular substrates with thin TiO2 coatings. APPLIED SURFACE SCIENCE ADVANCES 18, doi: 10.1016/j.apsadv.2023.100459 (VERIOS)

TINOCO NAVARRO, L.; CIHLÁŘ, J.; MICHALIČKA, J.; KAŠTYL, J.; ČÁSTKOVÁ, K., 2023: Effect of MCAA Synthesis and Calcination Temperature on Heterojunction Formation and Photocatalytic Activity of Biphasic TiO2 (B/A). CATALYSIS LETTERS 2, doi: 10.1007/s10562-023-04489-7 (RIGAKU3, FTIR, VERIOS, TITAN, KRATOS-XPS, BET-ANAMET, ZETASIZER)

KAMNEV, K.; BENDOVÁ, M.; PYTLÍČEK, Z.; PRÁŠEK, J.; KEJÍK, L.; GUELL, F.; LLOBET, E.; MOZALEV, A., 2023: Se-doped Nb2O5-Al2O3 composite-ceramic nanoarrays via the anodizing of Al/Nb bilayer in selenic acid. CERAMICS INTERNATIONAL 49 (22), p. 34712 - 14, doi: 10.1016/j.ceramint.2023.08.134 (MAGNETRON, VERIOS, KRATOS-XPS, MPS150, KEITHLEY-4200)

TAKHSHA GHAHFAROKHI, M.; FURLANI, F.; PANSERI, S.; CASOLI, F.; UHLÍŘ, V.; ALBERTINI, F., 2023: Magnetic Shape-Memory Heuslers Turn to Bio: Cytocompatibility of Ni-Mn-Ga Films and Biomedical Perspective. ACS APPLIED BIO MATERIALS 6 (11), p. 5009 - 9, doi: 10.1021/acsabm.3c00691 (VERIOS, VERSALAB)

ORUDZEV, F.; SELIMOV, D.; RABADANOVA, A.; SHUAIBOV, A.; ABDURAKHAMANOV, M;. GULAKHMEDOV, R.; PAPEZ, N.; SHIKHGASAN, R.; ZVEREVA, I.; CASTKOVA, K., 2023: 1D/2D Electrospun Polyvinylidene Fluoride Nanofibers/Carbon Flakes Hybrid Nonmetal Polymeric Photo- and Piezocatalyst. CHEMISTRYSELECT 8 (43), p. 1 - 11, doi: 10.1002/slct.202303318 (KRATOS-XPS, VERIOS, LEICACOAT-STAN, FTIR, RIGAKU3)

NG, S.; SANNA, M.; REDONDO NEGRETE, E.; PUMERA, M., 2023: Engineering 3D-printed carbon structures with atomic layer deposition coatings as photoelectrocatalysts for water splitting. JOURNAL OF MATERIALS CHEMISTRY A 12 (1), p. 396 - 9, doi: 10.1039/d3ta04460b (ALD, KRATOS-XPS, VERIOS)

Paredes, C.; Roleček, J.; Pejchalová, L.; Spusta, T.; Salamon, D.; Miranda, P., 2023: Evaluating the suitability of fast sintering techniques for the consolidation of calcium phosphate scaffolds produced by DLP. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 43 (14), p. 6493 - 6503, doi: 0.1016/j.jeurceramsoc.2023.05.052 (VERIOS, LYRA, RIGAKU3)

VISHAKHA, V.; ABDELLATIF, A.; MICHALIČKA, J.; WHITE, P.; LEPCIO, P.; TINOCO NAVARRO, L.; JANČÁŘ, J., 2023: Carboxymethyl starch as a reducing and capping agent in the hydrothermal synthesis of selenium nanostructures for use with three-dimensional-printed hydrogel carriers. ROYAL SOCIETY OPEN SCIENCE 10 (10), p. 1 - 17, doi: 10.1098/rsos.230829 (ZETASIZER, RIGAKU3, VERIOS, MIRA-STAN, LEICACOAT-STAN, TITAN, FTIR-CHEMLAB, KRATOS-XPS, JASCO)

Göçtü, Y.; Oral, CM.; Ercan, B., 2023: Selenite-Incorporated Amorphous Calcium-Magnesium Carbonate Nanoparticles Reduce Bacterial Growth. ACS APPLIED NANO MATERIALS 6 (18), p. 16286 - 11, doi: 10.1021/acsanm.3c02415 (KRATOS-XPS, VERIOS)

GAO, W.; MICHALIČKA, J.; PUMERA, M., 2022: Hierarchical Atomic Layer Deposited V2O5 on 3D Printed Nanocarbon Electrodes for High-Performance Aqueous Zinc-Ion Batteries. SMALL 18 (1), p. 2105572-1 - 13, doi: 10.1002/smll.202105572 (ALD, VERIOS, MIRA-STAN, TITAN, RIGAKU3, KRATOS-XPS)

SOPHA, H.; GHIGO, C.; NG, S.; ALIJANI, M.; HROMÁDKO, L.; MICHALIČKA, J.; DJENIZIAN, T.; MACÁK, J., 2022: TiO2 nanotube layers decorated by titania nanoparticles as anodes for Li-ion microbatteries. MATERIALS CHEMISTRY AND PHYSICS 276, p. 1 - 7, doi: 10.1016/j.matchemphys.2021.125337 (TITAN, VERIOS)

ORAL, Ç.; USSIA, M.; YAVUZ, D.; PUMERA, M., 2022: Shape Engineering of TiO2 Microrobots for "On-the-Fly" Optical Brake. SMALL 18 (10), p. 21076271-6 - 6, doi: 10.1002/smll.202106271 (LEICACOAT-STAN, VERIOS, MIRA-STAN, RIGAKU3)

Simonovic, K.; Vitu, T.; Cammarata, A.; Cavaleiro, A.; Polcar, T., 2022: Tribological behaviour of W-S-C coated ceramics in a vacuum environment. TRIBOLOGY INTERNATIONAL 167, doi: 10.1016/j.triboint.2021.107375 (VERIOS)

KAŠTYL, J.; ŠŤASTNÝ, P.; CHLUP, Z.; SONG, L.; ŠČASNOVIČ, E.; TRUNEC, M., 2022: Gelcast zirconia ceramics for dental applications combining high strength and high translucency. JOURNAL OF THE AMERICAN CERAMIC SOCIETY 105 (6), p. 3909 - 16, doi: 10.1111/jace.18417 (VERIOS, TITAN, HELIOS, RIGAKU3, DEKTAK)

GABLECH, E.; FOHLEROVÁ, Z.; ŠVEC, K.; ZALEŠ, F.; BENADA, O.; KOFROŇOVÁ, O.; PEKÁRKOVÁ, J.; CAHA, O.; GABLECH, I.; DRBOHLAVOVÁ, J., 2022: Selenium nanoparticles with boron salt-based compound act synergistically against the brown-rot Serpula lacrymans. INTERNATIONAL BIODETERIORATION & BIODEGRADATION 169, p. 1 - 9, doi: 10.1016/j.ibiod.2022.105377 (VERIOS, RIGAKU9)

SANNA, M.; NG, S.; VAGHASIYA, J.; PUMERA, M., 2022: Fluorinated MAX Phases for Photoelectrochemical Hydrogen Evolution. ACS SUSTAINABLE CHEMISTRY AND ENGINEERING 10 (8), p. 2793 - 9, doi: 10.1021/acssuschemeng.1c08133 (VERIOS, KRATOS-XPS)

PEJCHAL, T.; BUKVIŠOVÁ, K.; VALLEJOS VARGAS, S.; CITTERBERG, D.; ŠIKOLA, T.; KOLÍBAL, M., 2022: Ga interaction with ZnO surfaces: Diffusion and melt-back etching. APPLIED SURFACE SCIENCE 583, p. 152475 - 6, doi: 10.1016/j.apsusc.2022.152475 (NANOSAM, VERIOS, KRATOS-XPS, HELIOS)

NG, S.; GHOSH, K.; VYSKOČIL, J.; PUMERA, M., 2022: Two-dimensional vanadium sulfide flexible graphite/polymer films for near-infrared photoelectrocatalysis and electrochemical energy storage. CHEMICAL ENGINEERING JOURNAL 435 (P3), p. 135131-1 - 14, doi: 10.1016/j.cej.2022.135131 (MPS150, KEITHLEY-4200, VERIOS, KRATOS-XPS, RIGAKU3)

GHOSH, K.; NG, S.; IFFELSBERGER, C.; PUMERA, M., 2022: 2D MoS2/carbon/polylactic acid filament for 3D printing: Photo and electrochemical energy conversion and storage. APPLIED MATERIALS TODAY 26, p. 101301-1 - 10, doi: 10.1016/j.apmt.2021.101301 (VERIOS, KRATOS-XPS, RIGAKU3, MPS150, KEITHLEY-4200)

DRDLÍKOVÁ, K.; KLEMENT, R.; SVOBODA, J.; DRDLÍK, D.; GALUSEK, D.; MACA, K., 2022: Luminescent Dy3+ and Dy3+/Cr3+ doped transparent Al2O3 ceramics: Microstructure and optical properties. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 42 (10), p. 4343 - 10, doi: 10.1016/j.jeurceramsoc.2022.03.047 (VERIOS, LYRA, TITAN)

PRAJZLER, V.; MACA, K.; ŠŤASTNÝ, P.; TODD, R., 2022: Abnormal grain growth in DC flash sintered 3-mol% yttria-stabilized zirconia ceramics. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, p. 5562 - 7, doi: 10.1111/jace.18542 (VERIOS)

Krpenský, J., 2022: Fabrication, optimization and in-situ characterization of thermally tunable vanadium dioxide nanostructures. MASTER'S THESIS (EVAPORATOR, UHV-PLD, LYRA, VERIOS, TITAN)

MUNOZ MARTIN, J.; REDONDO NEGRETE, E.; PUMERA, M., 2022: Functional metal-based 3D-printed electronics engineering: Tunability and bio-recognition. APPLIED MATERIALS TODAY 28, p. 1 - 6, doi: 10.1016/j.apmt.2022.101519 (KRATOS-XPS, VERIOS)

IFFELSBERGER, C.; NG, S.; PUMERA, M., 2022: Photoelectrolysis of TiO2 is highly localized and the selectivity is affected by the light. CHEMICAL ENGINEERING JOURNAL 446, p. 136995-1 - 12, doi: 10.1016/j.cej.2022.136995 (VERIOS, MIRA-STAN, RIGAKU3, KRATOS-XPS)

MANIŠ, J.; MACH, J.; BARTOŠÍK, M.; ŠAMOŘIL, T.; HORÁK, M.; ČALKOVSKÝ, V.; NEZVAL, D.; KACHTÍK, L.; KONEČNÝ, M.; ŠIKOLA, T., 2022: Low temperature 2D GaN growth on Si(111) 7 x 7 assisted by hyperthermal nitrogen ions. NANOSCALE ADVANCES 4 (17), p. 1 - 8, doi: 10.1039/d2na00175f (VERIOS, ICON-SPM, NANOSAM, LYRA, TITAN)

WANG, L.; NG, S.; JYOTI, J.; PUMERA, M., 2022: Al2O3/Covalent Organic Framework on 3D-Printed Nanocarbon Electrodes for Enhanced Biomarker Detection. ACS APPLIED NANO MATERIALS 5 (7), p. 9719 - 9, doi: 10.1021/acsanm.2c01937 (ALD, KRATOS-XPS, VERIOS)

BIJALWAN, V.; PRAJZLER, V.; ERHART, J.; VELAZQUEZ, J.; GALUSEK, D.; MACA, K., 2022: Rapid pressureless sintering of barium titanate-based piezoceramics and their electromechanical harvesting performance. JOURNAL OF THE AMERICAN CERAMIC SOCIETY 3, p. 6886 - 12, doi: 10.1111/jace.18602 (RIGAKU9, VERIOS)

KACVINSKÁ, K.; TRÁVNÍČKOVÁ, M.; VOJTOVÁ, L.; POLÁČEK, P.; DORAZILOVÁ, J.; KOHOUTEK, M.; HLINÁKOVÁ, K.; PAJOROVÁ, J.; TIRPÁKOVÁ, M.; BAČÁKOVÁ, L., 2022: Porous cellulose-collagen scaffolds for soft tissue regeneration: influence of cellulose derivatives on mechanical properties and compatibility with adipose-derived stem cells. CELLULOSE 29 (15), p. 1 - 23, doi: 10.1007/s10570-022-04759-4 (VERIOS)

TAN, H.; ZHANG, H.; SALAMON, D., 2022: Densification behavior and mechanical properties of nano-alumina ceramics prepared by Spark Plasma Sintering with pressure applied at different sintering stages.. CERAMICS INTERNATIONAL 48 (20), p. 30224 - 5, doi: 10.1016/j.ceramint.2022.06.295 (VERIOS)

PAREDES SÁNCHEZ, C.; ROLEČEK, J.; PEJCHALOVÁ, L.; MIRANDA MENDES, J.; SALAMON, D., 2022: Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds. OPEN CERAMICS 11, p. 100281-1 - 9, doi: 10.1016/j.oceram.2022.100281 (RIGAKU3, VERIOS, LYRA)

Díaz-Sánchez, M.; Delgado-Álvarez, P. N.; Gómez, I. J.; Díaz-García, D.; Prashar, S.; Gómez-Ruiz, S., 2022: Modulation of the photocatalytic activity and crystallinity of F-TiO 2 nanoparticles by using green natural carboxylic acids. CRYSTENGCOMM 24 (37), p. 6454 - 6467, doi: 10.1039/D2CE00699E (VERIOS, KRATOS-XPS)

ŠŤASTNÝ, P.; SMIEŠKOVÁ, J.; TRUNEC, M., 2022: Preparation of multilayer ceramic tapes by aqueous gel-tape co-casting. CERAMICS INTERNATIONAL 48 (21), p. 32546 - 5, doi: 10.1016/j.ceramint.2022.07.248 (HELIOS, VERIOS)

ZHANG, X.; KAŠTYL, J.; CASAS LUNA, M.; HAVLÍČEK, L.; VONDRA, M.; BRUMMER, V.; SUKAČOVÁ, K.; MÁŠA, V.; TENG, S.; NEUGEBAUER, P., 2022: Microalgae-derived nanoporous biochar for ammonia removal in sustainable wastewater treatment. JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING 10 (6), doi: 10.1016/j.jece.2022.108514 (VERIOS, KRATOS-XPS)

GAO, W.; IFFELSBERGER, C.; PUMERA, M., 2022: Dual polymer engineering enables high-performance 3D printed Zn-organic battery cathodes. APPLIED MATERIALS TODAY 28, p. 101515 - 12, doi: 10.1016/j.apmt.2022.101515 (VERIOS, KRATOS-XPS)

Bondarev, A.; Ponomarev, I.; Muydinov, R.; Polcar, T., 2022: Friend or Foe? Revising the Role of Oxygen in the Tribological Performance of Solid Lubricant MoS2. ACS APPLIED MATERIALS AND INTERFACES 14 (49), p. 55051 - 55061, doi: 10.1021/acsami.2c15706 (HELIOS, TITAN, KRATOS-XPS, VERIOS, MIRA-STAN)

Holobrádek, J., 2022: Low damping magnonic (meta)materials with enhanced control over local magnetic properties. TREATISE TO STATE DOCTORAL EXAM, p. 1 - 26 (VERIOS, HELIOS, KERR-MICROSCOPE, MAGNETRON, KAUFMAN)

Ondříšková, M., 2022: Analysis and characterisation of spirally–arranged field–emission nanostructure. BACHELOR'S THESIS, p. 1 - 56 (VERIOS, DRIE, KRATOS-XPS)

Kamnev, K., 2022: Porous-alumina-assisted formation of metal and metal-oxide nanostructures for use in advanced micro-devices. PH.D. THESIS, p. 1 - 145 (VERIOS, HELIOS, TITAN, MAGNETRON, MPS150, KEITHLEY-4200)

BIJALWAN, V.; ERHART, J.; SPOTZ, Z.; SOBOLA, D.; PRAJZLER, V.; TOFEL, P.; MACA, K., 2021: Composition driven (Ba,Ca)(Zr,Ti)O(3)lead-free ceramics with large quality factor and energy harvesting characteristics. JOURNAL OF THE AMERICAN CERAMIC SOCIETY 3, p. 1088 - 14, doi: 10.1111/jace.17497 (RIGAKU3, VERIOS)

ŘÍHOVÁ, M.; INCE, A.; ČIČMANCOVÁ, V.; HROMÁDKO, L.; ČÁSTKOVÁ, K.; PAVLIŇÁK, D.; VOJTOVÁ, L.; MACÁK, J., 2021: Water-born 3Dnanofiber mats usingcost-effectivecentrifugal spinning: comparison with electrospinnig process: A complex study. JOURNAL OF APPLIED POLYMER SCIENCE 138 (5), p. e49975-1 - 14, doi: 10.1002/app.49975 (VERIOS)

GAO, W.; PUMERA, M., 2021: 3D Printed Nanocarbon Frameworks for Li-Ion Battery Cathodes. ADVANCED FUNCTIONAL MATERIALS, p. 2007285-1 - 10, doi: 10.1002/adfm.202007285 (VERIOS, LYRA, KRATOS-XPS)

BIJALWAN, V.; PRAJZLER, V.; ERHART, J.; TAN, H.; ROUPCOVÁ, P.; SOBOLA, D.; TOFEL, P.; MACA, K., 2021: Rapid pressure-less and spark plasma sintering of (Ba0.85Ca0.15Zr0.1T0.9)O3 lead-free piezoelectric ceramics. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 41 (4), p. 2514 - 10, doi: 10.1016/j.jeurceramsoc.2020.11.029 (RIGAKU3, VERIOS)

DRDLÍK, D.; ZEMAN, D.; TOFEL, P.; CHLUP, Z.; HADRABA, H.; DRDLÍKOVÁ, K., 2021: A comparative study of direct and indirect evaluation of piezoelectric properties of electrophoreticaly deposited (Ba, Ca) (Zr, Ti)O-3 lead-free piezoceramics. CERAMICS INTERNATIONAL 47 (2), p. 2034 - 9, doi: 10.1016/j.ceramint.2020.09.035 (VERIOS, RIGAKU3)

REDONDO NEGRETE, E.; MUNOZ MARTIN, J.; PUMERA, M., 2021: Green activation using reducing agents of carbon-based 3D printed electrodes: Turning good electrodes to great. CARBON 175, p. 413 - 7, doi: 10.1016/j.carbon.2021.01.107 (VERIOS, KRATOS-XPS)

KASPAR, P.; SOBOLA, D.; ČÁSTKOVÁ, K.; DALLAEV, R.; ŠŤASTNÁ, E.; SEDLÁK, P.; KNÁPEK, A.; TRČKA, T.; HOLCMAN, V., 2021: Case Study of Polyvinylidene Fluoride Doping by Carbon Nanotubes. MATERIALS 14 (6), p. 1428-1 - 12, doi: 10.3390/ma14061428 (RIGAKU3, VERIOS, KRATOS-XPS, FTIR)

NG, S.; IFFELSBERGER, C.; MICHALIČKA, J.; PUMERA, M., 2021: Atomic Layer Deposition of Electrocatalytic Insulator Al2O3 on Three-Dimensional Printed Nanocarbons. ACS NANO 15 (1), p. 686 - 12, doi: 10.1021/acsnano.0c06961 (TITAN, ALD, KRATOS-XPS, VERIOS)

ALIJANI, M.; SOPHA, H.; NG, S.; MACÁK, J., 2021: High aspect ratio TiO2 nanotube layers obtained in a very short anodization time. ELECTROCHIMICA ACTA 376, p. 1 - 9, doi: 10.1016/j.electacta.2021.138080 (VERIOS)

ŠŤASTNÝ, P.; CHLUP, Z.; ČÁSTKOVÁ, K.; TRUNEC, M., 2021: High strength alumina tapes prepared by gel-tape casting method. CERAMICS INTERNATIONAL 47 (5), p. 6988 - 8, doi: 10.1016/j.ceramint.2020.11.048 (VERIOS, LYRA)

Vaňatka, M., 2021: Static and dynamic properties of nanostructured magnetic materials. PH.D. THESIS, p. 1 - 113 (VERSALAB, VNA-MPI, TITAN, BRILLOUIN, MIRA-EBL, RAITH, KERR-MICROSCOPE, MAGNETRON, EVAPORATOR, VERIOS, WIRE-BONDER, LYRA)

NG, S.; ZAZPE MENDIOROZ, R.; RODRIGUEZ PEREIRA, J.; MICHALIČKA, J.; MACÁK, J.; PUMERA, M., 2021: Atomic layer deposition of photoelectrocatalytic material on 3D-printed nanocarbon structures. JOURNAL OF MATERIALS CHEMISTRY A 18 (9), p. 11405 - 10, doi: 10.1039/d1ta01467f (VERIOS, TITAN, RIGAKU3)

Bondarev, A. V.; Antonyuk, M. N.; Kiryukhantsev-Korneev, Ph V.; Polcar, T.; Shtansky, D. V., 2021: Insight into high temperature performance of magnetron sputtered Si-Ta-C-(N) coatings with an ion-implanted interlayer. APPLIED SURFACE SCIENCE 541, doi: 10.1016/j.apsusc.2020.148526 (VERIOS, HELIOS, KRATOS-XPS, NANOINDENTER)

SEPÚLVEDA SEPÚLVEDA, L.; KAMNEV, K.; PYTLÍČEK, Z.; PRÁŠEK, J.; MOZALEV, A., 2021: Superhydrophobic-Oleophobic Visible-Transparent Antireflective Nanostructured Anodic HfO2 Multifunctional Coatings for Potential Solar Panel Applications. ACS APPLIED NANO MATERIALS 4 (2), p. 1754 - 12, doi: 10.1021/acsanm.0c03202 (MAGNETRON, RIE-FLUORINE, VERIOS, JAZ3-CHANNEL)

WANG, L.; GAO, W.; NG, S.; PUMERA, M., 2021: Chiral Protein-Covalent Organic Framework 3D-Printed Structures as Chiral Biosensors. ANALYTICAL CHEMISTRY 93 (12), p. 5277 - 7, doi: 10.1021/acs.analchem.1c00322 (VERIOS, KRATOS-XPS, LYRA)

Shabanov, N. S.; Rabadanov, K. Sh.; Suleymanov, S. I.; Amirov, A. M.; Isaev, A. B.; Sobola, D. S.; Murliev, E. K.; Asvarova, G. A., 2021: Water-Soluble Copper Ink for the Inkjet Fabrication of Flexible Electronic Components. MATERIALS 14 (9), doi: 10.3390/ma14092218 (VERIOS)

F. M. Mwema, D. Sobola, A. D. Baruwa, and E. T. Akinlabi, 2021: Effect of Heat Treatment on the Structure and Morphology of Silver-Coated Three Dimensional Printed Flexible Polylactic Acid Thin Plates. MATERIALS PERFORMANCE AND CHARACTERIZATION 10 (1), p. 87 - 12, doi: 10.1520/MPC20200022 (VERIOS, KRATOS-XPS)

GHOSH, K.; PUMERA, M., 2021: Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application. NANOSCALE 13 (11), p. 5744 - 13, doi: 10.1039/d0nr06479c (VERIOS, KRATOS-XPS, RIGAKU3)

GHAHFAROKHI, M.; ARREGI URIBEETXEBARRIA, J.; CASOLI, F.; HORKÝ, M.; CABASSI, R.; UHLÍŘ, V.; ALBERTINI, F., 2021: Microfabricated ferromagnetic-shape-memory Heuslers: The geometry and size effects. APPLIED MATERIALS TODAY 23, p. 101058-1 - 11, doi: 10.1016/j.apmt.2021.101058 (VERSALAB, RIGAKU9, KERR-MICROSCOPE, SUSS-MA8, RIE-FLUORINE, EVAPORATOR, WIRE-BONDER, VERIOS)

ČECHOVÁ, L.; KRČMA, F.; KALINA, M.; MAN, O.; KOZÁKOVÁ, Z., 2021: Preparation of Silver and Gold Nanoparticles by the Pin-Hole DC Plasma System. JOURNAL OF APLIED PHYSICS 129 (23), p. 233304-1 - 9, doi: 10.1063/5.0044054 (VERIOS)

SOPOUŠEK, J.; DRENČÁKOVÁ, D.; BROŽ, P.; BURŠÍK, J.; ZEMANOVÁ, A.; ROUPCOVÁ, P., 2021: On thermal stability of nanocrystalline Ag-Cu-S powders. JOURNAL OF NANOPARTICLE RESEARCH 23 (7), p. 138-1 - 14, doi: 10.1007/s11051-021-05244-y (VERIOS)

KAUSHIK, P.; ELIÁŠ, M.; PRÁŠEK, J.; MICHALIČKA, J.; ZAJÍČKOVÁ, L., 2021: Manipulating MWCNT/TiO2 heterostructure morphology at nanoscale and its implications to NO2 sensing properties. MATERIALS CHEMISTRY AND PHYSICS 271, p. 124901-1 - 11, doi: 10.1016/j.matchemphys.2021.124901 (EVAPORATOR, PECVD-NANOFAB, DIENER, ALD, RIGAKU9, VERIOS, TITAN)

IFFELSBERGER, C.; JELLETT, C.; PUMERA, M., 2021: 3D Printing Temperature Tailors Electrical and Electrochemical Properties through Changing Inner Distribution of Graphite/Polymer. SMALL 17 (24), p. 1 - 9, doi: 10.1002/smll.202101233 (VERIOS)

ALIJANI, M.; SOPHA, H.; NG, S.; RODRIGUEZ PEREIRA, J.; MACÁK, J., 2021: High-Aspect-Ratio TiO2 Nanotube Layers via Galvanostatic Anodization in an Electrolyte Containing Lactic Acid. PHYSICA STATUS SOLIDI - RAPID RESEARCH LETETRS 15 (7), p. 2100146-1 - 5, doi: 10.1002/pssr.202100146 (VERIOS)

SUCHÝ, J.; KLAKURKOVÁ, L.; MAN, O.; REMEŠOVÁ, M.; HORYNOVÁ, M.; PALOUŠEK, D.; KOUTNÝ, D.; KRIŠTOFOVÁ, P.; VOJTĚCH, D.; ČELKO, L., 2021: Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. JOURNAL OF MANUFACTURING PROCESSES 69, p. 556 - 11, doi: 10.1016/j.jmapro.2021.08.006 (VERIOS, TIC3X, RIGAKU3)

FOHLEROVÁ, Z.; KAMNEV, K.; SEPÚLVEDA SEPÚLVEDA, L.; PYTLÍČEK, Z.; PRÁŠEK, J.; MOZALEV, A., 2021: Nanostructured Zirconium-Oxide Bioceramic Coatings Derived from the Anodized Al/Zr Metal Layers. ADVANCED MATERIALS INTERFACES 14 (8), p. 1 - 14, doi: 10.1002/admi.202100256 (MAGNETRON, VERIOS)

HAVRANOVÁ, P.; FOJT, L.; KEJÍK, L.; ŠIKOLA, T.; FOJTA, M.; DAŇHEL, A., 2021: Electrodeposition of silver amalgam particles on screen-printed silver electrodes in voltammetric detection of 4-nitrophenol, bovine serum albumin and artificial nucleosides dTPT3 and d5SICS. SENSORS AND ACTUATORS B: CHEMICAL 340, p. 129921-1 - 9, doi: 10.1016/j.snb.2021.129921 (VERIOS)

ŠŤASTNÝ, P.; CHLUP, Z.; ROUPCOVÁ, P.; TRUNEC, M., 2021: Thin high-strength zirconia tapes with extreme flexibility. JOURNAL OF ASIAN CERAMIC SOCIETIES 9 (3), p. 964 - 11, doi: 10.1080/21870764.2021.1930744 (VERIOS, RIGAKU3)

SEPÚLVEDA SEPÚLVEDA, L.; KAMNEV, K.; MOZALEV, A., 2021: Dielectric properties of nanostructured mixed-oxide films formed by anodizing Al/Zr bilayers. 12TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH AND APPLICATION (NANOCON), p. 44 - 6, doi: 10.37904/nanocon.2020.3693 (MAGNETRON, VERIOS)

KAMNEV, K.; PYTLÍČEK, Z.; PRÁŠEK, J.; MOZALEV, A., 2021: Anodic formation of HfO2 nanostructure arrays for resistive switching application. 12TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH AND APPLICATION (NANOCON), p. 122 - 5, doi: 10.37904/nanocon.2020.3692 (MAGNETRON, VERIOS, MPS150)

MAYORGA BURREZO, P.; MUNOZ MARTIN, J.; ZAORALOVÁ, D.; OTYEPKA, M.; PUMERA, M., 2021: Multiresponsive 2D Ti3C2Tx MXene via Implanting Molecular Properties. ACS NANO (E-ISSN) 15 (6), p. 10067 - 9, doi: 10.1021/acsnano.1c01742 (VERIOS, KRATOS-XPS)

RUZGAR, S.; CAGLAR, Y.; POLAT, Ö.; SOBOLA, D.; CAGLAR, M., 2021: The influence of Fe substitution into photovoltaic performance of p-CuO/n-Si heterojunctions. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 32 (15), p. 20755 - 12, doi: 10.1007/s10854-021-06589-9 (VERIOS)

NG, S.; ŠTURALA, J.; VYSKOČIL, J.; LAZAR, P.; MARTINCOVÁ, J.; PLUTNAR, J.; PUMERA, M., 2021: Two-Dimensional Functionalized Germananes as Photoelectrocatalysts. ACS NANO (E-ISSN) 15 (7), p. 11681 - 13, doi: 10.1021/acsnano.1c02327 (VERIOS)

LEPCIO, P.; ONDREÁŠ, F.; ZÁRYBNICKÁ, K.; ZBONČÁK, M.; SVATÍK, J.; JANČÁŘ, J., 2021: Phase diagram of bare particles in polymer nanocomposites: Uniting solution and melt blending. POLYMER 230, p. 124033 - 6, doi: 10.1016/j.polymer.2021.124033 (MIRA-STAN, VERIOS)

KAMNEV, K.; SEPÚLVEDA SEPÚLVEDA, L.; BENDOVÁ, M.; PYTLÍČEK, Z.; PRÁŠEK, J.; KOLÍBALOVÁ, E.; MICHALIČKA, J.; MOZALEV, A., 2021: The Growth, Composition, and Functional Properties of Self-Organized Nanostructured ZrO2-Al2O3 Anodic Films for Advanced Dielectric Applications. MATERIALS CHEMISTRY FRONTIERS 7 (10), p. 1 - 13, doi: 10.1002/aelm.202100505 (TITAN, MAGNETRON, HELIOS, VERIOS)

MUNOZ MARTIN, J.; REDONDO NEGRETE, E.; PUMERA, M., 2021: Versatile Design of Functional Organic-Inorganic 3D-Printed (Opto)Electronic Interfaces with Custom Catalytic Activity. SMALL 17 (41), p. 1 - 9, doi: 10.1002/smll.202103189 (KRATOS-XPS, VERIOS)

IFFELSBERGER, C.; PUMERA, M., 2021: High resolution electrochemical additive manufacturing of microstructured active materials: case study of MoSx as a catalyst for the hydrogen evolution reaction. JOURNAL OF MATERIALS CHEMISTRY A 9 (38), p. 22072 - 10, doi: 10.1039/d1ta05581j (LYRA, MIRA-STAN, VERIOS, KRATOS-XPS)

FORDEY, T.; BOUCHAL, P.; SCHOVÁNEK, P.; BARÁNEK, M.; BOUCHAL, Z.; DVOŘÁK, P.; HRTOŇ, M.; ROVENSKÁ, K.; LIGMAJER, F.; CHMELÍK, R.; ŠIKOLA, T., 2021: Single-Shot Three-Dimensional Orientation Imaging of Nanorods Using Spin to Orbital Angular Momentum Conversion. NANO LETTERS 21 (17), p. 7244 - 8, doi: 10.1021/acs.nanolett.1c02278 (VERIOS)

WANG, L.; PUMERA, M., 2021: Covalently modified enzymatic 3D-printed bioelectrode. MICROCHIMICA ACTA 188 (11), p. 374-1 - 8, doi: 10.1007/s00604-021-05006-6 (VERIOS, KRATOS-XPS)

VAŇATKA, M.; SZULC, K.; WOJEWODA, O.; DUBS, C.; CHUMAK, A.; KRAWCZYK, M.; DOBROVOLSKIY, O.; KLOS, J.; URBÁNEK, M., 2021: Spin-Wave Dispersion Measurement by Variable-Gap Propagating Spin-Wave Spectroscopy. PHYSICAL REVIEW APPLIED 16 (5), p. 054033-1 - 10, doi: 10.1103/PhysRevApplied.16.054033 (VNA-MPI, BRILLOUIN, RAITH, EVAPORATOR, MAGNETRON, DIENER, VERIOS, RIE-FLUORINE)

REDONDO NEGRETE, E.; PUMERA, M., 2021: Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing. APPLIED MATERIALS TODAY 25, p. 101253-1 - 6, doi: 10.1016/j.apmt.2021.101253 (DEKTAK, VERIOS, KRATOS-XPS)

Ramazanov, S.; Sobola, D.; Ţălu, Ş.; Orudzev, F.; Arman, A.; Kaspar, P.; Dallaev, R.; Ramazanov, G., 2021: Multiferroic behavior of the functionalized surface of a flexible substrate by deposition of Bi2O3 and Fe2O3. MICROSCOPY RESEARCH AND TECHNIQUE, p. 1 - 11, doi: 10.1002/jemt.23996 (LYRA, SIMS, KRATOS-XPS, VERIOS)

PEJCHALOVÁ, L.; ROLEČEK, J.; SALAMON, D., 2021: Why freeze-casting brings different phase composition of calcium phosphates?. OPEN CERAMICS 7, p. 1595 - 8, doi: 10.1016/j.oceram.2021.100161 (VERIOS, RIGAKU3)

Pejchal, T., 2021: Towards highly-doped Ge and ZnO nanowires: Growth, characterization and doping level analysis. PH.D. THESIS (NANOSAM, VERIOS, KRATOS-XPS, HELIOS, TITAN, ALD, EVAPORATOR, MIRA-EBL, MPS150)

Liška, P., 2021: Optical characterization of advanced nanomaterials with a high lateral resolution. MASTER'S THESIS, p. 1 - 91 (NANOSAM, ICON-SPM, LYRA, TITAN, VERIOS, KRATOS-XPS, SIMS)

Nedvěd, M., 2021: Preparation of low-dimensional inorganic perovskites. BACHELOR'S THESIS, p. 1 - 46 (VERIOS)

KAŠTYL, J.; CHLUP, Z.; ŠŤASTNÝ, P.; TRUNEC, M., 2020: Machinability and properties of zirconia ceramics prepared by gelcasting method. ADVANCES IN APPLIED CERAMICS 119 (5-6), p. 252 - 9, doi: 10.1080/17436753.2019.1675402 (DEKTAK, VERIOS)

LEDNICKÝ, T.; BONYÁR, A., 2020: Large Scale Fabrication of Ordered Gold Nanoparticle-Epoxy Surface Nanocomposites and Their Application as Label-Free Plasmonic DNA Biosensors. ACS APPL MATER INTER 12 (4), p. 4804 - 11, doi: 10.1021/acsami.9b20907 (MAGNETRON, RIE-FLUORINE, VERIOS, LYRA, HELIOS, KRATOS-XPS)

ŠŤASTNÝ, P.; VACEK, P.; TRUNEC, M., 2020: Characterization of microstructure and phase distribution of sintered multiphasic calcium phosphate bioceramics. CERAMICS INTERNATIONAL 46 (4), p. 5500 - 5, doi: 10.1016/j.ceramint.2019.10.300 (TIC3X, VERIOS, RIGAKU3, TITAN, HELIOS)

ŠŤASTNÝ, P.; CHLUP, Z.; TRUNEC, M., 2020: Gel-tape casting as a novel method for the production of flexible fine-grained alumina sheets. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 40 (7), p. 2542 - 6, doi: 10.1016/j.jeurceramsoc.2019.10.042 (VERIOS, DEKTAK)

Horák, M., 2020: Electron microscopy and spectroscopy in plasmonics. PH.D. THESIS, p. 1 - 129 (TITAN, HELIOS, VERIOS, LEICACOAT-STAN, EVAPORATOR, MAGNETRON, MIRA-EBL, LYRA, ICON-SPM)

Sebest, P.; Fojt, L.; Ostatna, V.; Fojta, M.; Danhel, A., 2020: Electrodeposited silver amalgam particles on pyrolytic graphite in (spectro)electrochemical detection of 4-nitrophenol, DNA and green fluorescent protein. BIOELECTROCHEMISTRY 132, p. 107436-1 - 9, doi: 10.1016/j.bioelechem.2019.107436 (VERIOS)

NG, S.; IFFELSBERGER, C.; SOFER, Z.; PUMERA, M., 2020: Tunable Room-Temperature Synthesis of ReS2 Bicatalyst on 3D-and 2D-Printed Electrodes for Photo- and Electrochemical Energy Applications. ADVANCED FUNCTIONAL MATERIALS 30 (19), p. 1910193-1 - 9, doi: 10.1002/adfm.201910193 (KRATOS-XPS, VERIOS)

IFFELSBERGER, C.; NG, S.; PUMERA, M., 2020: Catalyst coating of 3D printed structures via electrochemical deposition: Case of the transition metal chalcogenide MoSx for hydrogen evolution reaction. APPLIED MATERIALS TODAY 20, p. 100654-1 - 7, doi: 10.1016/j.apmt.2020.100654 (VERIOS, KRATOS-XPS)

NG, S.; PRÁŠEK, J.; ZAZPE, R.; PYTLÍČEK, Z.; SPOTZ, Z.; RODRIGUEZ-PEREIRA, J.; MICHALIČKA, J.; PŘIKRYL, J.; KRBAL, M.; SOPHA, H.; HUBÁLEK, J.; MACÁK, J., 2020: Atomic Layer Deposition of SnO2-Coated Anodic One-Dimensional TiO(2 )Nanotube Layers for Low Concentration NO2 Sensing. ACS APPL MATER INTER, p. 33386 - 11, doi: 10.1021/acsami.0c07791 (TITAN, VERIOS, RIGAKU3)

SCHÁNILEC, V.; CANALS, B.; UHLÍŘ, V.; FLAJŠMAN, L.; SADÍLEK, J.; ŠIKOLA, T.; ROUGEMAILLE, N., 2020: Bypassing Dynamical Freezing in Artificial Kagome Ice. PHYSICAL REVIEW LETTERS 125, p. 057203-1 - 5, doi: 10.1103/PhysRevLett.125.057203 (RAITH, EVAPORATOR, VERIOS, ICON-SPM)

Čalkovský, V., 2020: Fabrication and characterization of GaN nanostuctures. TREATISE TO STATE DOCTORAL EXAM, p. 1 - 38 (VERIOS, KRATOS-XPS, LYRA, TITAN)

Rovenská, K., 2020: Dielectric metasurfaces as modern optical components. MASTER'S THESIS, p. 1 - 57 (MAGNETRON, DEKTAK, KRATOS-XPS, MIRA-EBL, EVAPORATOR, VERIOS, RIE-FLUORINE, ALD)

PŘIBYL, R.; ŠŤASTNÝ, P.; PAZDERKA, M.; KELAR, J.; KELAR TUČEKOVÁ, Z.; ZEMÁNEK, M.; TRUNEC, M.; ČERNÁK, M., 2020: Properties of MgAl2O4 doped alumina barrier layers for dielectric barrier discharge. JOURNAL OF PHYSICS D - APPLIED PHYSICS 53 (50), p. 505202-1 - 11, doi: 10.1088/1361-6463/abb0ba (RIGAKU3, VERIOS)

REDONDO NEGRETE, E.; NG, S.; MUNOZ MARTIN, J.; PUMERA, M., 2020: Tailoring capacitance of 3D-printed graphene electrodes by carbonisation temperature. NANOSCALE 12 (38), p. 19673 - 8, doi: 10.1039/d0nr04864j (VERIOS, KRATOS-XPS)

DRDLÍKOVÁ, K.; DRDLÍK, D.; HADRABA, H.; KLEMENT, R.; MACA, K., 2020: Optical and mechanical properties of Mn-doped transparent alumina and their comparison with selected rare earth and transient metal doped aluminas. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 40 (14), p. 4894 - 7, doi: 10.1016/j.jeurceramsoc.2020.01.041 (VERIOS, TITAN)

GHOSH, K.; NG, S.; IFFELSBERGER, C.; PUMERA, M., 2020: Inherent impurities in graphene/polylactic acid filament strongly influence on the capacitive performance of 3D-printed electrode. CHEMISTRY-A EUROPEAN JOURNAL 26 (67), p. 15746 - 8, doi: 10.1002/chem.202004250 (VERIOS, KRATOS-XPS, RIGAKU3, FTIR)

ŠŤASTNÁ, E.; ČÁSTKOVÁ, K.; RÁHEĽ, J., 2020: Influence of Hydroxyapatite Nanoparticles and Surface Plasma Treatment on Bioactivity of Polycaprolactone Nanofibers. POLYMERS 12 (9), p. 1 - 16, doi: 10.3390/polym12091877 (RIGAKU3, VERIOS, KRATOS-XPS)

ZÁRYBNICKÁ, K.; ONDREÁŠ, F.; LEPCIO, P.; CHEN, C.; JANČÁŘ, J., 2020: In-situ self-assembly of silica nanoparticles into microfibers with potential to reinforce polymers. NANOCON CONFERENCE PROCEEDINGS - INTERNATIONAL CONFERENCE ON NANOMATERIALS 2020-Octob, p. 673 - 678, doi: 10.37904/nanocon.2019.8489 (VERIOS, TITAN, FTIR-CHEMLAB)

ZÁRYBNICKÁ, K.; ONDREÁŠ, F.; LEPCIO, P.; KALINA, M.; ZBONČÁK, M.; JANČÁŘ, J., 2020: Thermodynamic Parameters Controlling Nanoparticle Spatial Packing in Polymer Solutions. MACROMOLECULES 53 (19), p. 8704 - 8713, doi: 10.1021/acs.macromol.0c00698 (VERIOS)

KASPAR, P.; SOBOLA, D.; ČÁSTKOVÁ, K.; KNÁPEK, A.; BURDA, D.; ORUDZHEV, F.; DALLAEV, R.; TOFEL, P.; TRČKA, T.; GRMELA, L.; HADAŠ, Z., 2020: Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes. POLYMERS 12 (12), p. 2766-1 - 15, doi: 10.3390/polym12122766 (VERIOS, KRATOS-XPS, RIGAKU3, FTIR)

GHOSH, K.; NG, S.; IFFELSBERGER, C.; PUMERA, M., 2020: ReS2: A High-Rate Pseudocapacitive Energy Storage Material. ACS APPLIED ENERGY MATERIALS 3 (10), p. 10261 - 9, doi: 10.1021/acsaem.0c02187 (VERIOS, KRATOS-XPS, RIGAKU3)

Rapuc, A.; Simonovic, K.; Huminiuc, T.; Cavaleiro, A.; Polcar, T., 2020: Nanotribological Investigation of Sliding Properties of Transition Metal Dichalcogenide Thin Film Coatings. ACS APPL MATER INTER 12 (48), p. 54191 - 12, doi: 10.1021/acsami.0c16789 (VERIOS, TITAN, HELIOS)

Motyčková, L., 2020: Magnetic properties of self-assembled FeRh nanomagnets. MASTER'S THESIS, p. 1 - 90 (MAGNETRON, VERSALAB, ICON-SPM, RIGAKU9, VERIOS, KERR-MICROSCOPE)

BIJALWAN, V.; TOFEL, P.; ERHART, J.; MACA, K., 2019: The complex evaluation of functional properties of nearly dense BCZT ceramics and their dependence on the grain size. CERAMICS INTERNATIONAL 45 (1), p. 317 - 10, doi: 10.1016/j.ceramint.2018.09.169 (VERIOS, RIGAKU3)

HOLEŇÁK, R.; SPUSTA, T.; POTOČEK, M.; SALAMON, D.; ŠIKOLA, T.; BÁBOR, P., 2019: 3D localization of spinel (MgAl2O4) and sodium contamination in alumina by TOF-SIMS. MATERIALS CHARACTERIZATION 148, p. 252 - 7, doi: 10.1016/j.matchar.2018.12.019 (SIMS, VERIOS)

BOUCHAL, P.; DVOŘÁK, P.; BABOCKÝ, J.; BOUCHAL, Z.; LIGMAJER, F.; HRTOŇ, M.; KŘÁPEK, V.; FAßBENDER, A.; LINDEN, S.; CHMELÍK, R.; ŠIKOLA, T., 2019: High-Resolution Quantitative Phase Imaging of Plasmonic Metasurfaces with Sensitivity down to a Single Nanoantenna. NANO LETTERS 19 (2), p. 1242 - 9, doi: 10.1021/acs.nanolett.8b04776 (EVAPORATOR, MIRA-EBL, VERIOS)

NG, S.; SOPHA, H.; ZAZPE MENDIOROZ, R.; SPOTZ, Z.; BIJALWAN, V.; DVOŘÁK, F.; HROMÁDKO, L.; PŘIKRYL, J.; MACÁK, J., 2019: TiO2 ALD Coating of Amorphous TiO2 Nanotube Layers: Inhibition of the Structural and Morphological Changes Due to Water Annealing. FRONTIERS IN CHEMISTRY 7, p. 1 - 12, doi: 10.3389/fchem.2019.00038 (VERIOS, RIGAKU3)

KAUSHIK, P.; ELIÁŠ, M.; MICHALIČKA, J.; HEGEMANN, D.; PYTLÍČEK, Z.; NEČAS, D.; ZAJÍČKOVÁ, L., 2019: Atomic layer deposition of titanium dioxide on multi-walled carbon nanotubes for ammonia gas sensing. SURFACE AND COATINGS TECHNOLOGY 370, p. 235 - 9, doi: 10.1016/j.surfcoat.2019.04.031 (ALD, EVAPORATOR, PECVD-NANOFAB, WOOLLAM-VIS, RIGAKU3, KRATOS-XPS, VERIOS, TITAN)

HAVRANOVÁ, P.; LIGMAJER, F.; DAŇHEL, A., 2019: Electrodeposition of Silver Amalgam on Thin Gold Film Electrodes for Voltammetric Detection of 4-Nitrophenol and DNA Labeled with Osmium Tetroxide-Bipyridine Complex. ELECTROANALYSIS 31, p. 1952 - 9, doi: 10.1002/elan.201900306 (VERIOS, EVAPORATOR)

LIGMAJER, F.; HORÁK, M.; ŠIKOLA, T.; FOJTA, M.; DAŇHEL, A., 2019: Silver Amalgam Nanoparticles and Microparticles: A Novel Plasmonic Platform for Spectroelectrochemistry. JOURNAL OF PHYSICAL CHEMISTRY C (PRINT) 123 (27), p. 16957 - 8, doi: 10.1021/acs.jpcc.9b04124 (VERIOS, TITAN, FTIR, WOOLLAM-MIR)

ZEMÁNEK, M.; PŘIBYL, R.; KELAR, J.; PAZDERKA, M.; ŠŤASTNÝ, P.; KÚDELČÍK, J.; TRUNEC, M.; ČERNÁK, M., 2019: Electrical properties of alumina-based ceramic barrier layers for dielectric barrier discharge. PLASMA SOURCES SCIENCE AND TECHNOLOGY 28 (7), p. 75001 - 7, doi: 10.1088/1361-6595/ab28fa (VERIOS)

ŠŤASTNÝ, P.; SEDLÁČEK, R.; SUCHÝ, T.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; TRUNEC, M., 2019: Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro. MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS 100, p. 544 - 10, doi: 10.1016/j.msec.2019.03.027 (VERIOS, RIGAKU3)

TRUNEC, M.; ŠŤASTNÝ, P.; KELAR, J.; PAZDERKA, M., 2019: Effect of plasma treatment of polymeric tape carriers on wetting behaviour of aqueous ceramic tape casting slurry. CERAMICS INTERNATIONAL 45 (7), p. 9318 - 5, doi: 10.1016/j.ceramint.2018.08.053 (VERIOS)

KOLÍBAL, M.; BUKVIŠOVÁ, K.; KACHTÍK, L.; ZAK, A.; NOVÁK, L.; ŠIKOLA, T., 2019: Formation of Tungsten Oxide Nanowires by Electron-Beam-Enhanced Oxidation of WS2 Nanotubes and Platelets. JOURNAL OF PHYSICAL CHEMISTRY C (PRINT) 123 (14), p. 9552 - 8, doi: 10.1021/acs.jpcc.9b00592 (KRATOS-XPS, TITAN, VERIOS)

SOBOLA, D.; KASPAR, P.; NEBOJSA, A.; HEMZAL, D.; GRMELA, L.; SMITH, S., 2019: Characterization of the native oxide on CdTe surfaces. MATERIALS SCIENCE-POLAND 37 (2), p. 1 - 6, doi: 10.2478/msp-2019-0030 (WOOLLAM-VIS, VERIOS)

HRUBÝ, J.; SANTANA, V.; KOSTIUK, D.; BOUČEK, M.; LENZ, S.; KERN, M.; ŠIFFALOVIČ, P.; VAN SLAGEREN, J.; NEUGEBAUER, P., 2019: A graphene-based hybrid material with quantum bits prepared by the double Langmuir–Schaefer method. RSC ADVANCES 9 (42), p. 24066 - 8, doi: 10.1039/c9ra04537f (KRATOS-XPS, VERIOS, ICON-SPM)

Krajňák, T., 2019: Deposition of large organic molecules under UHV. MASTER'S THESIS, p. 1 - 58 (LYRA, VERIOS, KRATOS-XPS)

Mouralova, K.; Zahradnicek, R.; Bednar, J., 2019: Study of vertical graphene growth on silver substrate based on design of experiment. DIAMOND AND RELATED MATERIALS 97, p. 107439-1 - 107439-7, doi: 10.1016/j.diamond.2019.107439 (EVAPORATOR, PECVD-NANOFAB, VERIOS, HELIOS, ICON-SPM, TITAN)

PRAJZLER, V.; PRŮŠA, S.; MACA, K., 2019: Rapid pressure-less sintering of fine grained zirconia ceramics: Explanation and elimination of a core-shell structure. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 39 (16), p. 5309 - 11, doi: 10.1016/j.jeurceramsoc.2019.07.053 (VERIOS)

TAN, H.; KALOUSEK, R.; SALAMON, D., 2019: Increasing energy efficiency by tailoring the electric pulse pattern during Spark Plasma Sintering. CERAMICS INTERNATIONAL 45 (18), p. 24392 - 6, doi: 10.1016/j.ceramint.2019.08.158 (VERIOS)

TORRES RODRÍGUEZ, J.; GUTIÉRREZ CANO, V.; MENELAOU, M.; KAŠTYL, J.; CIHLÁŘ, J.; TKACHENKO, S.; GONZÁLEZ, J.; KALMÁR, J.; FÁBIÁN, I.; LÁZÁR, I.; ČELKO, L.; KAISER, J., 2019: Rare-Earth Zirconate Ln2Zr2O7 (Ln: La, Nd, Gd, and Dy) Powders, Xerogels, and Aerogels: Preparation, Structure, and Properties. INORGANIC CHEMISTRY 58 (21), p. 14467 - 11, doi: 10.1021/acs.inorgchem.9b01965 (VERIOS, RIGAKU3)

Novák, J., 2019: Deposition of GaN nanocrystals with Ga droplets. BACHELOR'S THESIS, p. 1 - 39 (VERIOS)

TALU, S.; YADAV, R.; ŠIK, O.; SOBOLA, D.; DALLAEV, R.; SOLAYMANI, S.; MAN, O., 2018: How topographical surface parameters are correlated with CdTe monocrystal surface oxidation. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING 85, p. 15 - 9, doi: 10.1016/j.mssp.2018.05.030 (VERIOS, WOOLLAM-VIS)

Danhel, A; Ligmajer, F; Sikola, T; Walcarius, A; Fojta, M, 2018: Electrodeposition of silver amalgam particles on ITO - Towards novel electrode material. JOURNAL OF ELECTROANALYTICAL CHEMISTRY 821, p. 53 - 59, doi: 10.1016/j.jelechem.2017.12.008 (VERIOS)

KOLÍBAL, M.; PEJCHAL, T.; MUSÁLEK, T.; ŠIKOLA, T., 2018: Catalyst–substrate interaction and growth delay in vapor–liquid–solid nanowire growth. NANOTECHNOLOGY 29 (20), p. 1 - 7, doi: 10.1088/1361-6528/aab474 (NANOSAM, VERIOS)

LIGMAJER, F.; KEJÍK, L.; TIWARI, U.; QIU, M.; NAG, J.; KONEČNÝ, M.; ŠIKOLA, T.; JIN, W.; HAGLUND, R.; APPAVOO, K.; LEI, D., 2018: Epitaxial VO2 nanostructures: A route to large-scale, switchable dielectric metasurfaces. ACS PHOTONICS 5 (7), p. 2561 - 7, doi: 10.1021/acsphotonics.7b01384 (RIGAKU9, ICON-SPM, VERIOS, FTIR)

ZDRAŽIL, L.; ZAHRADNÍČEK, R.; MOHAN, R.; SEDLÁČEK, P.; NEJDL, L.; SCHMIEDOVÁ, V.; POSPÍŠIL, J.; HORÁK, M.; WEITER, M.; ZMEŠKAL, O.; HUBÁLEK, J., 2018: Preparation of Graphene Quantum Dots through Liquid Phase Exfoliation Method. JOURNAL OF LUMINESCENCE 204, p. 203 - 6, doi: 10.1016/j.jlumin.2018.08.017 (TITAN, VERIOS, ICON-SPM, KRATOS-XPS)

Kachtík, L., 2018: Analysis and modifications of 1D nanostructures. TREATISE TO STATE DOCTORAL EXAM, p. 1 - 45 (TITAN, VERIOS)

Andrýsek, M., 2018: Growth of highly doped ZnO nanowires. MASTER'S THESIS, p. 1 - 47 (VERIOS, TITAN, KRATOS-XPS)

Ligmajer, F., 2018: Advanced plasmonic materials for metasurfaces and photochemistry. PH.D. THESIS, p. 1 - 142 (VERIOS, ICON-SPM, RIGAKU9, FTIR, WOOLLAM-VIS, TITAN)

Čalkovský, V., 2018: Deposition and characterization of GaN nanocrystals with a metal core. MASTER'S THESIS, p. 1 - 67 (VERIOS, KRATOS-XPS)

HAVRANOVÁ, P.; ŠEBEST, P.; LIGMAJER, F.; FOJTA, M.; DAŇHEL, A., 2018: Preparation and Characterization of Silver Amalgam Particles on Gold Electrode Surface. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE MODERN ELECTROCHEMICAL METHODS XXXVIII, p. 70 - 4 (VERIOS, EVAPORATOR)

Sebest, P.; Havranova, P.; Ligmajer, F.; Fojta, M.; Danhel, A., 2018: Electrochemical Deposition of Silver Amalgam Particles on Pyrolitic Graphite Electrode. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE MODERN ELECTROCHEMICAL METHODS XXXVIII, p. 217 - 4 (VERIOS)

Schánilec, V., 2018: Magnetic spin ice states in artificial magnetic frustrated systems. MASTER'S THESIS, p. 1 - 46 (RAITH, EVAPORATOR, VERIOS, ICON-SPM)

Horký, M., 2016: Growth of Metastable FCC FE Thin Films on Cu(100)/Si(100) Substrates. MASTER'S THESIS, p. 1 - 96 (ICON-SPM, LYRA, VERIOS, KRATOS-XPS, RIGAKU3)

Musálek, T., 2016: Semiconductor nanowire growth utilizing alloyed catalyst. MASTER’S THESIS, p. 1 - 52 (VERIOS, LYRA, MIRA-EBL, ALD)

Andrýsek, M., 2016: Preparation of surfaces with diffusion barrier for studying initial phase of semiconductor nanowire growth. BACHELOR’S THESIS, p. 1 - 22 (LYRA, VERIOS, ALD)

MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; MAN, O., 2016: Characterisation of 3D Topography of the Surface Machined by Finishing Technologies of WEDM and Grinding. PROCEEDINGS OF THE 2016 17TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME) 2016, p. 445 - 5 (VERIOS, ICON-SPM)